Industrial Oils

Showing results from 1 - 30 of total 120
None AL/CF-0005

Remarkable anti-wear performance Better low-temperature fluidity Resistant to aging over time Decreased deposits in discharge lines Improved water-separating properties

Specifications

  • OEM Specifications : DIN 51506 VDL (VB, VC) ISO 6743/3A (L-DAA)

None AL/HF-0005

Good thermal and oxidation stability Stable lubricating film between friction surfaces Extended oil change intervals and equipment lifetime Rapid air release, coupled with low foaming Effective corrosion protection

Specifications

  • OEM Specifications : DIN 51524-1 (HL) DIN 51517-2 (CL) ISO 11158 HL ISO-L-HL

None AL/QO-0002

Controlled cooling rate to minimize cracking and distortion Achieves a good surface finish Demonstrates excellent oxidation resistance and thermal stability Low volatility reduces oil loss through vaporization

Specifications

  • OEM Specifications : ISO 6743-14 L-UHA ISO 6743-14 L-UHB

None AL/HF-0022

Exceptional thermal and oxidation stability Superior wear resistance Enhanced corrosion protection Excellent anti-foam properties Ultra clean performance

Specifications

  • OEM Specifications : DIN 51524-3 (HV) ISO 11158 (HV) ASTM D6158 (HV) Eaton E-FDGN-TB002-E JCMAS P041 HK AIST 126/127 SAE MS1004 GM LS 2 SEB 181222

None AL/HF-0025

Exceptional thermal and oxidation stability Superior wear resistance Enhanced corrosion protection Excellent anti-foam properties Ultra clean performance

Specifications

  • OEM Specifications : DIN 51524-3 (HV); ISO 11158 (HV); Bosch Rexroth RDE 90235; Denison HF-0/HF-1/HF-2; Eaton E-FDGN-TB002-E; Fives Cincinnati P69; GB 11118.1-2011 (L-HV); ASTM D6158 (HV); GM LS 2; AIST 126, 127; SAE MS 1004, SEB 181222

None AL/CO-0011

Excellent protection for lubricated components Ensures a robust lubricating film Maximizes efficiency of the water removal system Minimizes the risk of unscheduled maintenance Extends the life of the oil charge, prolonging re-lubrication intervals

Specifications

  • OEM Specifications : Danieli 0.000.001 Type 21 Morgan No-Twist Mill (Spec MMC40003) DIN 51524 Part 1 & 2 ISO 11158 HL & HM Schuler Pressen DT 55055 01.2014

None AL/CF-0001

Remarkable anti-wear performance Better low-temperature fluidity Resistant to aging over time Decreased deposits in discharge lines Improved water-separating properties

Specifications

  • OEM Specifications : DIN 51506 VDL (VB, VC) ISO 6743/3A (L-DAA)

None AL/CF-0003

Remarkable anti-wear performance Better low-temperature fluidity Resistant to aging over time Decreased deposits in discharge lines Improved water-separating properties

Specifications

  • OEM Specifications : DIN 51506 VDL (VB, VC) ISO 6743/3A (L-DAA)

None AL/CF-0007

Remarkable anti-wear performance Better low-temperature fluidity Resistant to aging over time Decreased deposits in discharge lines Improved water-separating properties

Specifications

  • OEM Specifications : DIN 51506 VDL (VB, VC) ISO 6743/3A (L-DAA)

None AL/CF-0006

Remarkable anti-wear performance Better low-temperature fluidity Resistant to aging over time Decreased deposits in discharge lines Improved water-separating properties

Specifications

  • OEM Specifications : DIN 51506 VDL (VB, VC) ISO 6743/3A (L-DAA)

None AL/CF-0009

Superior thermal and oxidation stability Excellent varnish and sludge control High load carrying capability Enhanced resistance to rusting and corrosion Outstanding anti-wear, demulsibility and anti-foam properties Exceptional water separability

Specifications

  • OEM Specifications : DIN 51506 VDL ISO 6743/3A (L-DAB, L-DAC, L-DAH, L-DAG)

None AL/HF-0011

Exceptional thermal and oxidation stability Superior wear resistance Enhanced corrosion protection Controlled demulsibility Excellent anti-foam properties Neutral to seal materials

Specifications

  • OEM Specifications : DIN 51524 -2; ISO 11158 (HM); ISO 6743-4, (HM); GB 11118.1-2011; SAE MS 1004; US STEEL - 126/127; Bosch Rexroth RDE 90235; Denison HF-0/HF-1/HF-2; Eaton E-FDGN-TB002-E; Fives Cincinnati P69; ASTM D6158; JCMAS P041 HK; GM LS-2, SEB 181222

None AL/CF-0004

Remarkable anti-wear performance Better low-temperature fluidity Resistant to aging over time Decreased deposits in discharge lines Improved water-separating properties

Specifications

  • OEM Specifications : DIN 51506 VDL (VB, VC) ISO 6743/3A (L-DAA)

None AL/HF-0010

Exceptional thermal and oxidation stability Superior wear resistance Enhanced corrosion protection Controlled demulsibility Excellent anti-foam properties Neutral to seal materials

Specifications

  • OEM Specifications : DIN 51524 -2; ISO 11158 (HM); ISO 6743/4 (HM); GB 11118.1-2011; SAE - MS 1004; US STEEL 126/127; Bosch Rexroth RDE 90235; Denison HF-0/HF-1/HF-2; Eaton E-FDGN-TB002-E; Fives Cincinnati P70; ASTM D6158 (HM); JCMAS P041 HK; GM LS-2, SEB 181222

None AL/HF-0039

Minimizes equipment wear. Extends service life. Exhibits excellent anti-foam properties. Improves air separation. Well-suited for use in heavily watered systems.

Specifications

  • OEM Specifications : DIN 51524-2 (HLP), Sulzer, KraussMaffei

None AL/CO-0009

Excellent oxidation and thermal stability Outstanding anti-wear characteristics Remarkable water-separating properties Exceptional foam resistance Effective protection against rust and corrosion

Specifications

  • OEM Specifications : DIN 51524/1 (HL) DIN 51517-2 (CL) ISO 11158 (HL) ISO-L-HL

None AL/HF-0033

Outstanding water emulsifying ability Superior anti-wear properties Remarkable resistance to oxidation and thermal degradation Exceptional foam control and rapid air release properties Effective corrosion protection Excellent cleaning properties

Specifications

  • OEM Specifications : DIN 51524-2 (HLPD) ISO 6743/4 (HM) MAN N 698 Daimler DBL 6721

None AL/HF-0040

Minimizes equipment wear. Extends service life. Exhibits excellent anti-foam properties. Improves air separation. Well-suited for use in heavily watered systems.

Specifications

  • OEM Specifications : DIN 51524-2 (HLP), Sulzer, KraussMaffei

None AL/GO-0009

Long drain intervals Exceptional film strength and extreme pressure resistance Robust protection against rust and corrosion Extended equipment life Effective water separation and demulsification characteristics Low foaming tendency

Specifications

  • OEM Specifications : AIST 224 AGMA 9005-F16-AS DIN51517-3 (CLP) ISO 12925-1 Type CKD FAG SKF

None AL/GO-0008

Long drain intervals Exceptional film strength and extreme pressure resistance Robust protection against rust and corrosion Extended equipment life Effective water separation and demulsification characteristics Low foaming tendency

Specifications

  • OEM Specifications : AIST 224 AGMA 9005-F16-AS DIN51517-3 (CLP) ISO 12925-1 Type CKD FAG SKF

None AL/HF-0036

Exceptionally stable viscosity High anti-wear performance Excellent detergent characteristics High resistance to oxidation and hydrolysis Superior anticorrosion and antirust properties

Specifications

  • OEM Specifications : DIN 51524-3 (HVLPD) ISO 6743/4 (HV) AFNOR NF 48 603 (HV) Daimler DBL 6721

None AL/HF-0032

Outstanding water emulsifying ability Superior anti-wear properties Remarkable resistance to oxidation and thermal degradation Exceptional foam control and rapid air release properties Effective corrosion protection Excellent cleaning properties

Specifications

  • OEM Specifications : DIN 51524-2 (HLPD) ISO 6743/4 (HM) MAN N 698 Daimler DBL 6721

None AL/HF-0029

High oxidation resistance and thermal stability Exceptional anti-wear properties Outstanding oil film strength Excellent demulsibility characteristics Fast air release and low foaming Multi metal compatibility

Specifications

  • OEM Specifications : DIN 51524- 3, ISO 6743/4 (HV), Denison HF-0/HF-1/HF-2, Cincinnati Machine P-68, ISO 11158 (HV), AFNOR NF E 48-603 (HV), SIS SS 155434, SEB 181 222, U.S. Steel 126/127, GM LS-2, JCMAS P041 HK

None AL/HF-0016

Excellent anti-oxidation and anticorrosion properties. High thermal-oxidative stability. Outstanding seal compatibility. Superior antiwear characteristics. Great air separation ability. Extended oil drain intervals.

Specifications

  • OEM Specifications : DIN 51524-2 ISO 11158 (HM) ASTM D6158 (HM) SAE MS 1004 ISO 20763

None AL/HF-0012

Exceptional thermal and oxidation stability Superior wear resistance Enhanced corrosion protection Controlled demulsibility Excellent anti-foam properties Neutral to seal materials

Specifications

  • OEM Specifications : DIN 51524 -2; ISO 11158 (HM); ISO 6743-4, (HM); SAE MS 1004; US STEEL - 126/127; Denison HF-0/HF-1/HF-2; ASTM D6158 (HM); Eaton E-FDGN-TB002-E; JCMAS P041 HK; GM LS-2, SEB 181222

None AL/QO-0003

Controlled cooling rate to minimize cracking and distortion Achieves a good surface finish Demonstrates excellent oxidation resistance and thermal stability Low volatility reduces oil loss through vaporization

Specifications

  • OEM Specifications : ISO 6743-14 L-UHA ISO 6743-14 L-UHB

None AL/CO-0004

Excellent oxidation and thermal stability Outstanding anti-wear characteristics Remarkable water-separating properties Exceptional foam resistance Effective protection against rust and corrosion

Specifications

  • OEM Specifications : DIN 51524/1 (HL) DIN 51517-2 (CL) ISO 11158 (HL) ISO-L-HL

None AL/QO-0006

Controlled cooling rate to minimize cracking and distortion Achieves a good surface finish Demonstrates excellent oxidation resistance and thermal stability Low volatility reduces oil loss through vaporization

Specifications

  • OEM Specifications : ISO 6743-14 L-UHA ISO 6743-14 L-UHB

None AL/GO-0012

Long drain intervals Exceptional film strength and extreme pressure resistance Robust protection against rust and corrosion Extended equipment life Effective water separation and demulsification characteristics Low foaming tendency

Specifications

  • OEM Specifications : AIST 224 AGMA 9005-F16-AS DIN51517-3 (CLP) ISO 12925-1 Type CKD FAG SKF

None AL/HF-0018

Excellent anti-oxidation and anticorrosion properties. High thermal-oxidative stability. Outstanding seal compatibility. Superior antiwear characteristics. Great air separation ability. Extended oil drain intervals.

Specifications

  • OEM Specifications : DIN 51524-2 Fives Cincinnati P-70 ISO 11158 (HM) ASTM D6158 (HM) SAE MS 1004 ISO 20763